Notes on Routine Maintenance of Dryer Machine

Date:08/24/2012 08:17:35

Common minor issues are inevitable in the daily operation of dryer machine. The problems can be easily solved if the daily maintenance tips are kept in mind. Below are the common troubleshooting methods specially introduced by Hongxing experts.

The first common problem is that the dried materials fail to meet the moisture content standard. The simplest solution is to control the production capacity of the drying equipment and increase or decrease the heat supplied.

The seconde common problem is the swinging phenomenon appearing when the rolling ring rotates around the cylinder. This is most probably due to the reason that the flank of the concave shape joint is not fastened. By moderately fastening the flank, the problem can be overcome. However, if the flank is too tight, accidents are likely to happen.

The next common problem is the damaged space between the big gear and the small one. The abrasion of the supporting wheel or the blocking wheel or the small gear can lead to the above problem. The solution is to firstly analyze whether the abrasion is serious. If the abrasion is indeed serious, the part replacement should be considered. If not, just do some turning or install the abraded part oppositely. If customers are afraid of unstableness, the components can be replaced in pairs.

The last common problem is the cylinder swinging of the drying equipment. The reasons fall into two. One is that the connection between the supporting wheel and the bearing seat is destroyed. The solution to this is to adjust and reinforce it. The other may be that the flank of the rolling ring is worn. Accordingly, if the abrasion is not serious, some turning can be done; if serious, component replacement should be carried out.